How to update the Program

1. Connect the VIDEO cable with composit port only

2. Burning the UP DATE file on empty CD-R after changed the file name as "bank30.rom"

3. Insert the UP DATED CD after turn on the set.

4. UP DATE will be procedured with below message on the screen.

Target : FLASH
File : BANK30.rom

>>>>> Don't turn off the set and Dont' control the remote control during above time.

5. You can find the "COMPLETED" Message after finish.

6. The CD TRAY will be opened after 1 min. And please take out the CD.
>>>>> If the CD TRAY not be opended after 10 minuts, please disconect the power core and conect again. 

7. Disconect the power code and conect again. 

8. Finished.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

How to reset on the Factory 

1. Check the NO DISC

2. Find the SET UP Menu (Press the SETUP key)

3. Set the yellow cursor in  [DISPLAY -> TV ASPECT -> 16:9]

4. Press the remote control key as below
   **  1->3->9->7->1->3->9->ENTER

5. Check the "SYSTEM INFORMATION"

6. Press the ENTER, and you done .
 